For more information or a FREE security survey for your home, business, boat etc, we will happily quote on your requirements without pressure or obligation
contact us on Tel:- (0034) 902 887 286 or e-mail:- info@alarmsinspain.com
contact us on Tel:- (0034) 902 887 286 or e-mail:- info@alarmsinspain.com
Tel:- (0034) 902 887 286
Stand alone mode
In this mode the photos will be stored locally in the detector’s internal memory (last 61shots).
This mode starts automatically when the detector is not enrolled to any control panel after inserting batteries.
After the install and at the end of the walk test period (15 minutes) every movement in front of the detector
will trigger taking three photos and storing them in the internal memory.
The 5 / 1 minute sleep period then starts. The flash can be enabled/ disabled using the DIP switch.
The transmit function is disabled automatically.
Note: No date and time stamps are applied to the photos when the device operates in stand-alone mode.
Viewing photos from the detector’s internal memory
The detector stores the last 61 photos in its internal memory. The photos can be viewed by a PC:
1. Open the detector and disconnect the camera module’s cable.
2. Take the cover with the camera to the PC and use the cable (**provided
with the JA-80Q data module) to connect it to the PC USB port.
3. The camera module is accessible as a removable mass storage device.
Photos are stored in BMP files. Use a suitable viewer (i.e. “Windows
photo and fax viewer”) to view the photos.
4. After viewing the photos reinstall the camera module in the detector and
switch to normal operational mode.
In this mode the photos will be stored locally in the detector’s internal memory (last 61shots).
This mode starts automatically when the detector is not enrolled to any control panel after inserting batteries.
After the install and at the end of the walk test period (15 minutes) every movement in front of the detector
will trigger taking three photos and storing them in the internal memory.
The 5 / 1 minute sleep period then starts. The flash can be enabled/ disabled using the DIP switch.
The transmit function is disabled automatically.
Note: No date and time stamps are applied to the photos when the device operates in stand-alone mode.
Viewing photos from the detector’s internal memory
The detector stores the last 61 photos in its internal memory. The photos can be viewed by a PC:
1. Open the detector and disconnect the camera module’s cable.
2. Take the cover with the camera to the PC and use the cable (**provided
with the JA-80Q data module) to connect it to the PC USB port.
3. The camera module is accessible as a removable mass storage device.
Photos are stored in BMP files. Use a suitable viewer (i.e. “Windows
photo and fax viewer”) to view the photos.
4. After viewing the photos reinstall the camera module in the detector and
switch to normal operational mode.
Use this detector as a Stand Alone motion detector (see below) or add it to a full system so it can SMS photos to your mobile phone after any activation.